Helmholz Profibus profiPoint - Profibus Access Point
Includes Profibus Connector 90° , Diagnostic
It can be used in conjunction with a PROFIBUS connector as the active measurement point or as an active terminator. Power is supplied independent of the bus through a socket.
Through the use of an active terminating resistor, participants of the bus system can optionally be switched on and off without causing malfunctions.
An integrated LED allows the correct function of the profiPoint to be read. For connection to the PROFIBUS cable, a PROFIBUS connector is required.
Technical Specifications
| Order number |
700-972-1XA02 |
| Article name |
FLEXtra® profiPoint set |
| Scope of delivery |
FLEXtra® profiPoint, instructions, 1x PROFIBUS connector, 90°, screw
terminal, diagnostics, with PG |
| Dimensions (DxWxH) |
35 x 32 x 72 mm |
| Weight |
Approx. 85 g |
| Segment connection |
PROFIBUS connectors |
| Voltage supply |
24 V DC, 18...30 V DC |
| Output voltage per segment |
DC 24 V/5 V DC |
| Electrical isolation |
500 V |
| Current draw |
Max. 400 mA |
