Application  

• • Designed for use as a wiring box, junction box, terminal or pull box in indoor or outdoor applications where subject to windblown dust or rain.

Standards  

• UL 508A Type 3, 4 and 12
• cULus Listed per CSA C22.2 No 94; Type 3, 4, 12
• Complies with
• • NEMA Type 3, 4 and 12
  • IEC 60529, IP66

Construction   

• • • 14 gauge steel body up to 24”x24”; 12 gauge body when 30”x30” or larger
    • 14 gauge steel cover up to 24”x24”; 12 gauge cover when 30”x30” or larger
    • Smooth, continuously welded seams without knockouts, cutouts, or holes
    • Captivated stainless steel cover screws thread into sealed wells
    • Seamless poured-in place gasket
    • No provision for inner mounting panel
    • Mounting Foot Kit sold separately - use C3MTGFOOT
    • Replacement lid cover screws (package of 25) - use 1421A4XLCS25SS
    • Replacement lid cover washers/sealed wells (package of 25) - use 1421A4XLCW25

Finish  

• • Cover and enclosure are phosphatized and finished in ANSI 61 gray powder coating inside and outside .

Accessories

• • Additional Inner Panels
  • Swing Panel Kit
  • Terminal Kit Assemblies
  • Climate Control
  • General Accessories